$16.95
$16.95
(SAVE Now!)
as of 11/22/2024 (Details)
The La Crosse Technology TX29U-IT 915 MHz Wireless Temperature Sensor is used in conjunction with La Crosse Technology wireless temperature stations that use the 915 MHz Instant Transmission wireless technology. In order to establish proper communication between the display and outdoor transmitter it is important that they be set up as follows: 1. Bring both units inside and have the units 3-5 feet apart with nothing in-between them. 2. Remove the batteries from both units. 3. Press one of the buttons on the display at least 20 times to clear all memory. Verify that the display is blank before proceeding. 4. Using a good quality alkaline battery place them back into the remote sensor; making sure they are installed according to the diagrams in the battery compartment. Next, taking care not to press any buttons, reinstall the batteries in the display according to the diagram in the battery compartment. 5. Do not press any buttons for at least 15 minutes after installing the batteries. (Let them establish a good connection. An outdoor temperature should be showing on your display. You can now put your outdoor sensor back outside.
Technical Details
- Remote gauge for wireless tracking of indoor or outdoor temperatures
- 915 MHz transmission for powerful, continuous communication
- Works with La Crosse Technology Weather Stations: WS-7013U-IT, WS-7014CH-IT, WS-7017U-IT, WS-7034U-IT and WS-7215TWC-IT
- Also compatible with WS-7394U-IT-CH, WS-9077TWC-IT, WS-9080U-IT, WS-9117U-IT, WS-9160U-IT, WS-9611U-IT, WS-9640U-IT, WS-9711U-IT; Measures approximately 5 by 1 by 1-1/2 inches; takes 2 AA batteries, not included
- Tucked inside the paper product manual is where the you can find the screws