$36.95
$36.95
(SAVE Now!)
as of 11/22/2024 (Details)
Sewell BlastIR - Extend and Route Remote Control Signals The BlastIR is designed to get your remote control's signal to where it needs to go. Since remote control signals (IR) need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is not in sight. You'll need to extend your IR signals, especially if your TV is wall-mounted. How It Works How BlastIR Works This kit includes an IR receiver, a connecting block (which also serves as a signal repeater), and IR emitters. The IR receiver is a small inconspicuous device that you can mount on your HDTV's bezel or anywhere else in the room where you will want to point your remote. It is small and very easy to hide, but must be in line-of-site to your couch (or wherever you will be sitting when using your remote control). This receiver receives your remote control's commands and sends the signal over 3.5mm mini stereo wire to the connecting block (which you can hide behind your wall). The connecting block then actively repeats and sends the same signal through all IR emitters connected to the block. Four emitters come with the kit and each emitter features two "eyes". Each eye blasts out the same IR signal, and you can tape them directly to your equipment or simply fix them to a nearby shelf or wall (or even the back of the door of your video closet). BlastIR Contents Package Contents 1 - In-Wall IR Connecting Block 4 - Dual IR Emitters 1 - Dual Band Surface Mini IR Reciever 1 - Power Supply 2 - Mounting Screws
Technical Details
- Forward infrared signals to operate electronic components behind closed doors
- IR Receiver has size of 2.25in (L) x 0.5in (W) x 0.5in (H); 9ft cable is attached for connection to IR Repeater
- Emitters have a dual emitter y-cable; overall length is 9 feet; final 3 feet may be separated. 38kHz & 56kHz transmit frequency.
- Simple to use; Controls 4 devices (expandable to a maximum of 12)
- Kit includes: IR Distribution Block; Mini IR Receiver; (4) Dual IR Emitters; AC/DC Adapter; 2 Mounting Screws