$9.89
$9.89
(SAVE Now!)
as of 11/22/2024 (Details)
Refractometer calibration solution is used to accurately calibrate your refractometer for testing natural sea water or synthetic sea water. Specifically manufactured for calibrating refractometers for use in testing natural or synthetic sea water. Clean refractometer prism slide with clean fresh water. Dry completely with a soft clean cloth. Place a few drops of ACPTM Refractometer Calibration Solution on the prism slide. Allow 45 - 60 seconds if ATC (automatic temperature compensating) refractometer is used. Calibrate to 35 ppt. Clean refractomer prism slide with clean fresh water to remove RCSTM solution. Dry with a clean soft cloth so the prism slide is dry. Add a few drops of your aquarium water on the prism slide. Allow 45-60 seconds ATC refractometer is being used. Read the amount of dissolved salts in your aquarium water. Clean refractometer prism slide with clean fresh water after each use. For best results calibrate with RCSTM prior to each use. Note: Using RO or RO/DI water to calibrate a refractometer at -0- will yield inaccurate results when testing marine aquarium water in the 35 ppt. / SG 1.026 rangs.
Technical Details
- Specifically manufactured for calibrating refractometers for use in testing natural or synthetic sea water
- 60 ml