The Pentosin DOT 4 LV is a special brake fluid of highest DOT 4 performance levels and has an extremely low viscosity at cold temperatures. It offers safety against vapor lock; has excellent resistance to absorbing and retaining water and provides superior corrosion resistance. Due to the low viscosity in the low temperature range, it is suitable in …
This can be used for hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations . The fluid is specially designed for anti-locking brake systems (ABS). The viscosity (820 centipoises at -40 degree centigrade / -40 degree Fahrenheit) being lower than DOT 4 (up to 1800 cp) and DOT 3 …
(2) Bottles Motul RBF600 Performance Racing Brake Fluid 500ml Each DOT 4
TYPE OF USE All types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40°C (-40°F). PERFORMANCE STANDARDS : FMVSS 116 DOT 4 / SAE J …
Maxima DOT 4 Brake Fluid has a minimum boiling point of 510 Degree Fahrenheit which assures fade-free operation under the most severe use. Maxima Brake Fluids are advanced glycol blends with the latest additives to maintain your hydraulic brake and clutch system in top condition and prevent vapor lock. Maxima DOT 4 Brake Fluid is compatible with other …
Volvo brake fluid is the only brake fluid tested and approved by Volvo Cars. Volvo brake fluid must not be mixed with other unknown brake fluids. Brake fluid has a low viscosity at low temperatures which results in faster response and improved safety in cars equipped with ABS and ESP systems. The product also protects well against corrosion …
The V-12 Injector is designed to inexpensively perform RFI™ (reverse flush), vacuum/pressure bleeding, and master cylinder bench bleeding. The V-12 can develop 125 psi with comfortable hand force. The function of the V-12 is identical to our more expensive Pheonix Injectors™. When the injector handle is depressed fluid is injected out the nozzle. When the handle is released, …
This can be used for hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. It is specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. It exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40 degree centigrade (-40 degree Fahrenheit). The extreme thermal resistance …
Mmmn, precious blood. Vampires and brake rebuilders love Magura blood. It’s the recommended hydraulic fluid for all Magura hydraulic brakes. It’s a 10-weight mineral oil, unlike the stuff found in drugstores, which is usually 30-50 weight. The drugstore stuff will make the brake sluggish and could lead to brake failure, but if that doesn’t put you off, the …
100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems.EXTREME THERMAL RESISTANCE AND STABILITY: the elevated boiling point of RBF 600 FACTORY LINE (312 C / 593 F) enables effective braking even under the extreme conditions of competition.VERY EFFICIENT IN WET CONDITIONS: …
Lucas DOT 3 Brake Fluid is a high quality blend of polyethylene glycol ethers and additives which meet or exceed the industry minimum dry boiling point of 401. It meets the Federal Motor Vehicle Safety Standard (FMVSS) No. 116 and SAE J1703 specifications. Lucas DOT 3 Brake Fluid is recommended for use in both disc and drum brake …